If you’d like to afford yourself much needed privacy while also keep your house cooler and reduce power consumption, you should consider installing window tints to your home windows. It is an excellent DIY project, and while it is time-consuming, it’s also very simple and requires little tools. It is a very low-cost investment that will pay off in the long run. All you need is a little patience and careful planning and you can have window tint in no time. Here are some tips that can help you get started:
First and foremost, you will have to determine which windows should be tinted. If you’re on a tight budget and not sure if you can do them all, try to find which areas of your home are most exposed to the sunlight. If you have a room or an office with a TV or a computer, chances are you will have difficulties looking at the screens because of the glare. Tint can drastically reduce that, allowing you to work or set up a home media center to your liking. When you’ve chosen all the windows, it’s time to measure them. Remember to add a few more centimeters to each dimension to have some room for adjustments.
Select a tint
Selecting a right tint for your home can be tricky. Home window and car tinting experts from Sydney advise you to take a good look at your interior color scheme. For instance, shades of grey will provide neutral tinting, but bronze finishes coordinates with earth tone color schemes. Along with that you’ll have to choose the opacity. It can come in many variations, from almost invisible to total blackouts. If you’d like more privacy, you can go for the darker tones, however, bear in mind that it insulates heat just the same as any other tint.
Buying the tint
Before committing to window tint for the entire home, get a sample to make sure you get the color and opacity you desire. Many online home window tinting film retailers offer sample swatches free or for little money. Whether the film is billed by the square or linear measurements, your home window tinting film will arrive in a continuous roll of a set width. Order a long enough length to accommodate all the windows.
It’s time for work
First you need to clean the window with an ammonia-based window cleaner and wipe it completely dry. All the window cleaner needs to be taken off, as it will dissolve the adhesive on the window film. Before you apply the film, wet the glass with a mixture of water and baby-shampoo. The mixture will help you stick the tint to the window while also sliding it around so you can fit it properly. Roll the window film out on a flat surface and trim it to the desirable size. Before you put it on the window, start peeling the backing off the sticky side. Once you’ve peeled off the top five to ten centimeters of backing, put the top two corners in place and slowly and carefully work your way down using a squeegee in the center. After that, take care of the small air bubbles with a plastic scraper, and trim the edges where the film is sticking out.
Final touches and maintenance
Most window cleaning solutions can be used on window films but first you will have to wait a few weeks for it to completely dry out. Alternative cleaning solutions also include vinegar and water or soap and water solutions. You only need to be avoiding abrasives, from chemicals to rough paper towels. However, tints don’t last forever. The average lifespan of window film ranges from about 10 to 15 years, so you will have to replace them after that.
You can tint your windows in no time and save yourself a ton of money and provide yourself with the comfort you’ve always wanted. Installing home window tinting can cost about a third the price of professional installation. Any handy homeowner can achieve very professional-looking results in less than one weekend.
Author bio: Steven Clarke is a business consultant and a DIY enthusiast. In his spare time, he likes to write about his ideas and share them with the world. Steven is a regular contributor to several websites.